Wireless Access

last person joined: 20 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How to install AP on a 3200 controller.

This thread has been viewed 1 times

  • 1.  How to install AP on a 3200 controller.

    Posted Apr 24, 2014 12:34 PM

    I'm knew to the Aruba enviroment and I have a 3200 controller.I have 2 access points to install.Can I get some basic instructions on how to do this.


    #3200


  • 2.  RE: How to install AP on a 3200 controller.
    Best Answer

    Posted Apr 24, 2014 09:15 PM
    There are several ways to have APs discover the controller. If they're in the same subnet it should use ADP (Aruba Discovery Protocol) and show up. If they're in seperate subnets my preferred way is to create a DNS entry for aruba-master and point it to your controllers IP address. During boot up the AP will look for this and find your controller.


  • 3.  RE: How to install AP on a 3200 controller.

    Posted Apr 27, 2014 12:01 PM

    To addon, you can use DHCP option 43 to point to the Aruba controller IP address.