Wireless Access

Reply
New Contributor
Posts: 4
Registered: ‎10-23-2016

How to prefer AP for client?

Hi there,

is it possible to define the specific AP for client  by MAC or IP in configuration? Another AP can be selected only if this specific AP is switched off...

Guru Elite
Posts: 20,819
Registered: ‎03-29-2007

Re: How to prefer AP for client?

There is no way to do that from the AP side.  Some client software, like the Lenovo supplicant allow you to do that.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Highlighted
Aruba Employee
Posts: 31
Registered: ‎11-19-2007

Re: How to prefer AP for client?

What is the use case? Depending on (lots of) things it could be as easy as using SSID as a differentiator. If it's a PC/Mac this would work pretty reliably, have the client configured to connect to two SSIDs, have ssid1 broadcasting from the AP you want to be the primary and ssid2 out of the secondary, put ssid1 at the top of the scanning list. 

Cheers!
Marcus Wehmeyer
Search Airheads
Showing results for 
Search instead for 
Did you mean: