Wireless Access

Reply
Contributor I
Posts: 20
Registered: ‎06-23-2011

Huawei E392u-12 and RAP5

Have any of you managed to get Huawei E392u-12 4G modem to work?

 

This is what I have been using and for 4G settings I have chosen "none" for now. Would like to get it to work even on 3G.

 

provision-ap usb-type option
provision-ap usb-dev 0x12d11506
provision-ap usb-dial ATDT*99#
provision-ap usb-init AT+CGDCONT=1,'IP','internet'
provision-ap usb-modeswitch "-v 0x12d1 -p 0x14fe –M 55534243123456780000000000000011062000000100000000000000000000"

provision-ap usb-type option
provision-ap usb-dev 0x12d11505
provision-ap usb-dial ATDT*99#
provision-ap usb-init AT+CGDCONT=1,'IP','internet'
provision-ap usb-modeswitch "-v 0x12d1 -p 0x14db –M 55534243123456780000000000000a11062000000000000100000000000000"

provision-ap usb-type option
provision-ap usb-dev 0x12d11506
provision-ap usb-dial ATDT*99#
provision-ap usb-init AT+CGDCONT=1,'IP','internet'
provision-ap usb-modeswitch "-v 0x12d1 -p 0x14db –M 55534243123456780000000000000a11062000000000000100000000000000"

provision-ap usb-type option
provision-ap usb-dev 0x12d11505
provision-ap usb-dial ATDT*99#
provision-ap usb-init AT+CGDCONT=1,'IP','internet'
provision-ap usb-modeswitch "-v 0x12d1 -p 0x14fe –M 55534243123456780000000000000a11062000000000000100000000000000"

 

 

Contributor I
Posts: 20
Registered: ‎06-23-2011

Re: Huawei E392u-12 and RAP5

And here is the answer to my own question. It's working.

 

provision-ap master x.x.x.x
provision-ap link-priority-cellular 20
provision-ap link-priority-ethernet 40
provision-ap usb-tty ttyUSB0
provision-ap usb-type option
provision-ap usb-modeswitch "-v 0x12d1 -p 0x1505 -V 0x12d1 -P 0x1506 -M 55534243123456780000000000000011062000000100000000000000000000"
provision-ap usb-dev 0x12d11506
provision-ap usb-init AT+CGDCONT=1,"IP","internet"
provision-ap usb-dial ATDT*99#
provision-ap remote-ap
provision-ap reprovision ap-name xx:xx:xx:xx:xx

 

Contributor I
Posts: 20
Registered: ‎06-23-2011

Re: Huawei E392u-12 and RAP5

New problem.

 

RAP can make a connection to controller and radio comes up and stays up no problem with that.

But client can only browse internet for about 1-2 mins after radio has come up and then all data transfers just stops.

No matter is it split or tunnel. With modem attached to port0 it works perfectly so no problems with firewall rules.

 

Any ideas?

 

Btw: has anyone managed to get Huawei E353 to work?

New Contributor
Posts: 2
Registered: ‎01-06-2013

Re: Huawei E392u-12 and RAP5

[ Edited ]

I had my HUAWEI E392u-12 with the same problem..dammed

 

[Mod note: URL link removed]

New Contributor
Posts: 1
Registered: ‎12-23-2013

Re: Huawei E392u-12 and RAP5

[ Edited ]

Hi,

have you tried to update your firmware? It maybe the problem of firmware. And my version is Huawei E392u-21, it works.

 

[Mod note: URL link removed]

Search Airheads
Showing results for 
Search instead for 
Did you mean: