Wireless Access

Reply
Occasional Contributor II
Posts: 11
Registered: ‎10-28-2014

I need help converting cisco 2950 config for s1500024p

I have 40 offices we are replacing the switches in. All are Cisco 2950 24 port switches with the same config save for specific ip addresses and vlans. I have 40 new s1500-24p switches to configure. Is there an easy way to import the cisco config (attached). Or if someone is bored and wants to work it with me, I'd appreciate the help. I had hoped to work with an engineer at the Airheads conferance, but my boss was late on the approval.

Contributor II
Posts: 57
Registered: ‎12-10-2011

Re: I need help converting cisco 2950 config for s1500024p

 Below is the rough conversion of config from Cisco to Aruba.

 

 

hostname netarubasw01

 

mgmt-user smith root

  Password: <type password here>

 Re-Type password: <confirm password>

 

clock timezone CST -6

clock summer-time CDT recurring   <first|last|1-4>  

 

ip domain-name pmic.com

ip name-server 10.102.105.21

ip name-server 10.102.105.22

 

spanning-tree mode pvst

 

vlan 69

 !

 interface-profile switching-profile SW-PROFILE-69

switchport-mode access

access-vlan 69

!

interface-profile pvst-port-profile PORTFAST

portfast

!

 

interface gigabitethernet 0/0/1

switching-profile SW-PROFILE-69

pvst-port-profile PORTFAST

!

interface gigabitethernet 0/0/2

switching-profile SW-PROFILE-69

pvst-port-profile PORTFAST

!

interface gigabitethernet 0/0/3

switching-profile SW-PROFILE-69

pvst-port-profile PORTFAST

!

interface gigabitethernet 0/0/4

switching-profile SW-PROFILE-69

pvst-port-profile PORTFAST

!

interface gigabitethernet 0/0/5

switching-profile SW-PROFILE-69

pvst-port-profile PORTFAST

!

interface gigabitethernet 0/0/6

switching-profile SW-PROFILE-69

pvst-port-profile PORTFAST

!

interface gigabitethernet 0/0/7

switching-profile SW-PROFILE-69

pvst-port-profile PORTFAST

!

interface gigabitethernet 0/0/8

switching-profile SW-PROFILE-69

pvst-port-profile PORTFAST

!

interface gigabitethernet 0/0/9

pvst-port-profile PORTFAST

!

interface gigabitethernet 0/0/24

pvst-port-profile PORTFAST

!

interface vlan 1

no ip address

shutdown

!

interface vlan 69

ip address 192.168.69.2 255.255.255.0

!

ip-profile

default-gateway 192.168.69.1

!

logging 10.161.0.100

 

snmp-server community BBBr3ad

snmp-server enable trap

snmp-server trap enable authenticationFailure

snmp-server trap enable warmStart

snmp-server trap enable linkDown

snmp-server trap enable linkUp

snmp-server trap enable coldStart

 

 

ntp server 10.53.53.254

 

Guru Elite
Posts: 8,335
Registered: ‎09-08-2010

Re: I need help converting cisco 2950 config for s1500024p

Also, here is a guide that shows the different command equivalents.

http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/Mobility-Access-Switch-for-Cisco-Juniper-Engineers-Part-1-Basic/td-p/208839

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor II
Posts: 57
Registered: ‎12-10-2011

Re: I need help converting cisco 2950 config for s1500024p

Note:

 

1. Aruba configuration is based on profiles

     To alter port configuration, first creat the correponding profile

       [ view the list of profiles   by logging on to switch (config) #interface-profile ?

    Hence in above you see that:

     one profile is created to specificy the switchport details

    => interface-profile switching-profile SW-PROFILE-69

   Another profile is created to alter the STP properties (Since you are choosing PVST)

    => interface-profile pvst-port-profile PORTFAST

     [If you had choosed MSTP, then create 'interface-profile mstp-profile PORTFAST'

      and accordingly apply that mstp-profile under the port]

 

2. Instead of configuring indvidual ports, if they have lot of common config you can make use of 'interface-group' to make config simple & fast

For example: In above repetative interface/port config can be replaced as below

 

interface-group gigabitethernet VLAN69-PORTS

apply-to 0/0/1-0/0/9            <<<<<<<<<< This list you can alter based on which ports you want to target

switching-profile SW-PROFILE-69

pvst-port-profile PORTFAST

 

 

 

New Contributor
Posts: 3
Registered: ‎02-19-2015

Re: I need help converting cisco 2950 config for s1500024p

Thank you both for your valuable assistance. It is greatly appreciated.

New Contributor
Posts: 3
Registered: ‎02-19-2015

Re: I need help converting cisco 2950 config for s1500024p

[ Edited ]

Another question. As I am running this as a basic switch, do I really need all the pre-configured ACLs?

Or can I either remove or disable them?

Guru Elite
Posts: 8,335
Registered: ‎09-08-2010

Re: I need help converting cisco 2950 config for s1500024p

It's part of the default config. Many can't be removed.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: