Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IAP 103: Log Message: fail-prov-no-rule

This thread has been viewed 9 times

  • 1.  IAP 103: Log Message: fail-prov-no-rule

    Posted Oct 17, 2017 01:25 PM

    I have IAP 103's running code verision ArubaInstant_Pegasus_6.5.4.2_61807 . I'm getting the message "set amp discover allowed: code: fail-prov-no-rule" in the logs. What does this mean and is it a problem or issue?

     

    Thanks

     

    GW



  • 2.  RE: IAP 103: Log Message: fail-prov-no-rule

    Posted Oct 17, 2017 01:37 PM

    AMP is the acronym for Airwave Management Platform. I would guess it has something to do with that. Do you have it connected to an Airwave server? 

     

    If so, are you running IGC (Instant Group Config) or monitor only mode?



  • 3.  RE: IAP 103: Log Message: fail-prov-no-rule

    Posted Oct 17, 2017 02:31 PM

    We do not have an Airwave server. We just have three IAP 103's with one as the master.

     

    GW



  • 4.  RE: IAP 103: Log Message: fail-prov-no-rule

    EMPLOYEE
    Posted Oct 17, 2017 09:15 PM

    That fail-prov-no-rule means that there are no rules for that device in Aruba Activate, Aruba's cloud solution.  The message is benign and can be ignored.