Hit <Enter> to stop autoboot: 0
Booting OS partition 0
Checking image @ 0xee000000
Copying image from 0xee000000
Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
[ 0.000000] Flash variant: variant0
[ 0.000000]
[ 0.000000] Aruba Networks
[ 0.000000] ArubaOS Version 6.5.4.2 (build 61807 / label #61807)
[ 0.000000] Built by p4build@lesbos on 2017-10-07 at 00:39:00 PDT (gcc version 4.5.1)
[ 0.000000]
[ 0.000000] P1010 RDB board from Freescale Semiconductor
[ 0.000000] Memory: 248712k/262144k available (10060k kernel code, 13432k reserved, 612k data, 376k bss, 6520k init)
[ 0.001500] Brought up 1 CPUs
[ 0.078100] PCI: Probing PCI hardware
[ 0.121203] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.184002] pci 0001:02:00.0: PCI bridge to [bus 03-ff]
[ 0.246161] pci 0000:00:00.0: not setting up bridge for bus 0000:01
[ 0.320848] pci 0001:02:00.0: not setting up bridge for bus 0001:03
[ 4.923309] fsl-ifc ffe1e000.ifc: Freescale Integrated Flash Controller
[ 5.143789] irq 17: nobody cared (try booting with the "irqpoll" option)
[ 5.222960] Call Trace:
[ 5.252138] [cfff1f40] [c000853c] show_stack+0x44/0x154 (unreliable)
[ 5.328168] [cfff1f80] [c0084aac] __report_bad_irq+0x34/0xbc
[ 5.395869] [cfff1fa0] [c0084d08] note_interrupt+0x1d4/0x230
[ 5.463574] [cfff1fd0] [c0085aac] handle_fasteoi_irq+0xf4/0x13c
[ 5.534406] [cfff1ff0] [c0010654] call_handle_irq+0x18/0x28
[ 5.601064] [ce033d00] [c0004684] do_IRQ+0xcc/0x18c
[ 5.659396] [ce033d30] [c0011320] ret_from_except+0x0/0x18
[ 5.725025] --- Exception: 501 at _raw_spin_unlock_irqrestore+0x10/0x14
[ 5.725029] LR = __setup_irq+0x168/0x368
[ 5.855214] [ce033df0] [c0084488] __setup_irq+0x2c0/0x368 (unreliable)
[ 5.933334] [ce033e10] [c0084630] request_threaded_irq+0x100/0x15c
[ 6.007292] [ce033e40] [c02cc34c] fsl_ifc_ctrl_probe+0x1f4/0x2b4
[ 6.079160] [ce033e60] [c01fcc20] of_platform_device_probe+0x50/0x90
[ 6.155201] [ce033e80] [c018ce54] driver_probe_device+0xa4/0x1d4
[ 6.227066] [ce033ea0] [c018b9d0] bus_for_each_drv+0x6c/0xa8
[ 6.294770] [ce033ed0] [c018ccd8] device_attach+0xa4/0xc8
[ 6.359349] [ce033ef0] [c018c468] bus_probe_device+0x2c/0x44
[ 6.427053] [ce033f00] [c0189e0c] device_add+0x48c/0x5ec
[ 6.490599] [ce033f50] [c01fc5e8] of_device_register+0x30/0x44
[ 6.560380] [ce033f60] [c000a468] of_platform_device_create+0x44/0x74
[ 6.637457] [ce033f70] [c000a690] of_platform_bus_probe+0x12c/0x154
[ 6.712458] [ce033f90] [c037daf8] __machine_initcall_p1010_rdb_p1010rdb_publish_devices+0x38/0x48
[ 6.818695] [ce033fa0] [c0001ec4] do_one_initcall+0x3c/0x1d0
[ 6.886404] [ce033fd0] [c03759f0] kernel_init+0x1a4/0x268
[ 6.950979] [ce033ff0] [c0010a38] kernel_thread+0x4c/0x68
[ 7.015553] handlers:
[ 7.042635] [<c001ed38>] (fsl_ifc_ctrl_irq+0x0/0x1e4)
[ 7.103048] Disabling IRQ #17
[ 7.284822] ee000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank
[ 7.359965] Amd/Fujitsu Extended Query Table at 0x0040
[ 7.421456] number of CFI chips: 1
[ 7.475882] fsl-gianfar ethernet.2: enabled errata workarounds, flags: 0x4
[ 7.558285] gfar_probe: Renaming interface to bond0
[ 7.617149] /proc/gfar_bond0_stats created
[ 7.717034] Enabling watchdog on CPU 0
[ 7.763815] caam ffe30000.crypto: device ID = 0x0a14010000000000
[ 7.835808] caam ffe30000.crypto: job queues = 4
[ 7.891148] caam ffe30000.crypto: authenc-hmac-sha1-cbc-aes-caam
[ 7.963173] caam ffe30000.crypto: authenc-hmac-sha256-cbc-aes-caam
[ 8.037240] caam ffe30000.crypto: authenc-hmac-sha1-cbc-des3_ede-caam
[ 8.114462] caam ffe30000.crypto: authenc-hmac-sha256-cbc-des3_ede-caam
[ 8.193738] caam ffe30000.crypto: authenc-hmac-sha1-cbc-des-caam
[ 8.265742] caam ffe30000.crypto: authenc-hmac-sha256-cbc-des-caam
[ 8.344701] caam ffe30000.crypto: ccm-aes-caam
[ 8.442882]
[ 8.442887] Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
[ 8.534691] Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT
[ 8.653631] Starting Kernel DES KAT ...Completed Kernel DES KAT
[ 8.725636] Starting Kernel AES KAT ...Completed Kernel AES KAT
[ 8.769433]
[ 8.815302] Starting Kernel HMAC SHA1 FIPS KAT ...Completed Kernel HMAC SHA1 FIPS KAT
[ 8.910616] Starting Kernel HMAC SHA256 FIPS KAT ...Completed Kernel HMAC SHA256 FIPS KAT
[ 9.032543] Starting Kernel HMAC SHA384 FIPS KAT ...Completed Kernel HMAC SHA384 FIPS KAT
[ 9.155487] Starting Kernel HMAC SHA512 FIPS KAT ...Completed Kernel HMAC SHA512 FIPS KAT
[ 9.278450] Starting Kernel AES-CBC FIPS KAT ...Completed Kernel AES-CBC FIPS KAT
[ 9.413283] Starting Kernel AES-CCM FIPS KAT ...Completed Kernel AES-CCM FIPS KAT
[ 9.513708] Starting Kernel 3DES-CBC FIPS KAT ...Completed Kernel 3DES-CBC FIPS KAT
AP-type has_ble_support: USB.
Domain Name: arubanetworks.com
No panic info available
ardmore: Start hotplug
Enabling ble_daemon via nanny
[ 18.246837] AP xml model 84, num_radios 2 (jiffies 8951)
[ 18.310483] apType 84 hw_opmode 0
[ 18.350093] radio 0: band 1 ant 0 max_ssid 16
[ 18.402204] radio 1: band 0 ant 0 max_ssid 16
[ 18.513242] init_asap_mod: installation:0
[ 18.887224] firewall cpu: core-0
ardmore: Copying BT modules to /tmp
Starting watchdog process...
Getting an IP address...
[ 23.139301] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 29.143467] PHY: bond0 (mdio@ffe24000:00) - Link is Up - 1000/Full
[ 29.248718] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
10.0.36.91 255.255.255.0 10.0.36.254
Running ADP...Done. Master is 10.0.36.253
[ 53.065065] wifi0: AP type AP-215, radio 0, max_bssids 16
[ 53.282459] aruba_usb_power_control:1136 en:1 status:0
[ 53.344043] aruba_enable_usb_block:556 Enabled USB
[ 53.401405] aruba_usb_power_control:1141 Enable USB power control for 214/215
[ 53.486877] tomatin_usb_power_control:975 enable the USB
ardmore: Insmod BT modules
[ 54.181033] usbcore: registered new interface driver usbfs
[ 54.426931] usbcore: registered new interface driver hub
[ 54.548450] usbcore: registered new device driver usb
[ 54.707025] usbcore: registered new interface driver usbserial
[ 55.001595] USB Serial support registered for generic
[ 55.062364] usbcore: registered new interface driver usbserial_generic
[ 55.140637] usbserial: USB Serial Driver core
[ 55.286816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 55.365109] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[ 55.444377] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[ 55.587211] fsl-ehci fsl-ehci.0: irq 28, io base 0xffe22000
[ 55.660863] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 55.727659] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 55.808992] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 55.895492] usb usb1: Product: Freescale On-Chip EHCI Host Controller
[ 55.972642] usb usb1: Manufacturer: Linux 2.6.35 ehci_hcd
[ 56.037290] usb usb1: SerialNumber: fsl-ehci.0
[ 56.149006] hub 1-0:1.0: USB hub found
[ 56.193956] hub 1-0:1.0: 1 port detected
[ 56.535018] usbcore: registered new interface driver cdc_acm
[ 56.602888] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
shutting down watchdog process (nanny will restart it)...
<<<<< Welcome to the Access Point >>>>>
~ #
So it eventually ended up in a prompt. Power led blinking green, enet blinking green faster. Amber 5GHz.