Wireless Access

Reply
Occasional Contributor II

IAP-225 console login failed

IAP-225,connect with console,but there is no session,it is blank.WEB GUI can login normally.(I had tried four devices that are all like this)
I had checked something below:
console line is OK;
baud rate is 9600(all serial setting is OK);
Terminal access in system setting is already open;

Guru Elite

Re: IAP-225 console login failed

No flow control

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: