Wireless Access

Reply
Occasional Contributor I

IAP-228 Radios disabled - LLDP/POE Issue

Hello everyone,

 

I am facing an issue for few weeks :

My IAP-228 are connected to a Aruba 2530 Non-POE and a HP 2520 POE, through a POE+ Injector

 

Sometimes after a reboot, the IAP-228 disabled their radios.

I found the following logs in show tech :

"Power Supply                : POE-AF
LLDP Power                  : 0.0W
Current Operational State   : Ethernet port 1 disabled; All radios disabled;"

"

[  134.627885] Fri Jun  9 07:35:25 2017:61         68.952064 K2 radio 0 reject VAP creating for 11AF power
[  134.649555] Fri Jun  9 07:35:25 2017:62         68.973734 K2 radio 1 reject VAP creating for 11AF power
[  134.671742] Fri Jun  9 07:35:25 2017:63         68.995923 K2 radio 0 reject VAP creating for 11AF power
[  134.746840] Fri Jun  9 07:35:25 2017:64         69.071021 K2 radio 0 reject VAP creating for 11AF power
[  134.768199] Fri Jun  9 07:35:25 2017:65         69.092379 K2 radio 1 reject VAP creating for 11AF power
[  134.789054] Fri Jun  9 07:35:25 2017:66         69.113235 K2 radio 0 reject VAP creating for 11AF power
[  134.810716] Fri Jun  9 07:35:25 2017:67         69.134897 K2 radio 1 reject VAP creating for 11AF power
[  134.831979] Fri Jun  9 07:35:25 2017:68         69.156159 K2 radio 0 reject VAP creating for 11AF power
[  134.852968] Fri Jun  9 07:35:25 2017:69         69.177149 K2 radio 1 reject VAP creating for 11AF power
[  134.874710] Fri Jun  9 07:35:25 2017:70         69.198891 K2 radio 0 reject VAP creating for 11AF power
[  134.895946] Fri Jun  9 07:35:25 2017:71         69.220127 K2 radio 1 reject VAP creating for 11AF power

"

"

Jun  9 09:36:01  sapd[3398]: <311020> <ERRS> |AP Borne_11@10.200.0.22 sapd|  An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3121 error send_pwr_status_to_stm: fail to get aruba101 bssid.
Jun  9 09:36:01  sapd[3398]: <311020> <ERRS> |AP Borne_11@10.200.0.22 sapd|  An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3121 error send_pwr_status_to_stm: fail to get aruba102 bssid.
Jun  9 09:36:02  sapd[3398]: <311020> <ERRS> |AP Borne_11@10.200.0.22 sapd|  An internal system error has occurred at file sapd_instant.c function send_pwr_status_to_stm line 3121 error send_pwr_status_to_stm: fail to get aruba103 bssid.

"

 

 

I already had this issue, and the only workaround I found is to reboot the IAP until it boots correctly and then the LLDP negociated correctly (which it seems to be required for an 802.11af power).

 

 

The switches and IAPs are running last firmware image :

 

IAP:

"

Aruba Operating System Software.
ArubaOS (MODEL: 228), Version 6.5.3.0
Website: http://www.arubanetworks.com
(c) Copyright 2017 Hewlett Packard Enterprise Development LP.
Compiled on 2017-05-24 at 22:08:47 AST (build 59775) by p4build
FIPS Mode :disabled
"

 

HP 2520 :

"

Image stamp:    /ws/swbuildm/rel_hartford_qaoff/code/build/elmo(rel_hartford_qaoff)
                Apr 13 2017 15:49:56
                S.15.09.0029
                66
Boot Image:     Primary

"

 

Aruba 2530 :

"

Image stamp:    /ws/swbuildm/rel_tacoma_qaoff/code/build/lakes(swbuildm_rel_tacoma_qaoff_rel_tacoma)
                Apr 14 2017 12:48:22
                YA.16.03.0004
                223
Boot Image:     Primary

Boot ROM Version:    YA.15.19

"

 

Pretty strange, espacially I have other IAP-228 on other Aruba/Procurve switches which are running fine without any problem.

 

I already checked cables

 

 

Anyone is facing the same issue?

Is there any way to disable this negotiation process, or at least for not disabling radios?

Does anyone know a reliable workaround?

 

 

Thanks

 

 

Cheers!

Jeremy

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: