Wireless Access

last person joined: 18 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IAP 93 Virtual Controller and Guest network

This thread has been viewed 0 times

  • 1.  IAP 93 Virtual Controller and Guest network

    Posted Jul 27, 2012 04:14 PM

    Greetings,


    I'm new to Aurba but we just purchased a few Aurba IAP 93 access points to play with.  I was setting up a guest network and letting the virtual controller assign the vlan.  It was giving out 172.16.x.x ip addresses.  Then I took the 6.1.3.1 firmware upgrade.  Now the guest vlan gives out 192.168.x.x ip addresses.  Is there anyway to change that back to 172.16.x.x.?

     

    Thanks!



  • 2.  RE: IAP 93 Virtual Controller and Guest network

    Posted Jul 27, 2012 05:01 PM
    eddielowrey,

    IAP does not have an option to change the private subnet that is assigned, but it will select a subnet that is not currently used on the network.