Wireless Access

Reply
Occasional Contributor II
Posts: 137
Registered: ‎10-05-2015

IAP active site survey - no DHCP - how to?

Hi there, we want to do an activer site survey using an IAP305. So we take the IAP305 with us everywhere in the building, and want to power it with a portable PoE injector / battery. So we can do the site survey.

 

But the IAP won't send any signal on the radios without having an IP from DHCP (enet LED is off). Is there a way to let the IAP send signal without an IP, because we cannot connect it to the network during walking all rooms. And small router is not able to conenct to the portable battery.

 

Please let me know!

Guru Elite
Posts: 20,993
Registered: ‎03-29-2007

Re: IAP active site survey - no DHCP - how to?

Have you seen the thread here?  http://community.arubanetworks.com/t5/Wireless-Access/Site-Survey-with-IAP-Manual/m-p/57274

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Highlighted
MVP
Posts: 2,989
Registered: ‎10-25-2011

Re: IAP active site survey - no DHCP - how to?

[ Edited ]

Hello A while ago I did a manual on this, this could help you http://community.arubanetworks.com/t5/Wireless-Access/Site-Survey-with-IAP-Manual/td-p/57274

 

Cheers Carlos

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Search Airheads
Showing results for 
Search instead for 
Did you mean: