Wireless Access

last person joined: 21 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IAP active site survey - no DHCP - how to?

This thread has been viewed 0 times

  • 1.  IAP active site survey - no DHCP - how to?

    Posted Mar 22, 2017 08:30 AM

    Hi there, we want to do an activer site survey using an IAP305. So we take the IAP305 with us everywhere in the building, and want to power it with a portable PoE injector / battery. So we can do the site survey.

     

    But the IAP won't send any signal on the radios without having an IP from DHCP (enet LED is off). Is there a way to let the IAP send signal without an IP, because we cannot connect it to the network during walking all rooms. And small router is not able to conenct to the portable battery.

     

    Please let me know!



  • 2.  RE: IAP active site survey - no DHCP - how to?
    Best Answer

    EMPLOYEE
    Posted Mar 22, 2017 08:37 AM

    Have you seen the thread here?  http://community.arubanetworks.com/t5/Wireless-Access/Site-Survey-with-IAP-Manual/m-p/57274

     

     



  • 3.  RE: IAP active site survey - no DHCP - how to?

    Posted Mar 22, 2017 08:38 AM

    Hello A while ago I did a manual on this, this could help you http://community.arubanetworks.com/t5/Wireless-Access/Site-Survey-with-IAP-Manual/td-p/57274

     

    Cheers Carlos