Wireless Access

Reply
Highlighted
Frequent Contributor I

IAP105 and IAP315 IDS settings

Hi,

 

we have a customer that has a cluster of IAP-105's Now they decided to buy new IAPs to cover an extra zone. They bought IAP305.

Now there is no firmware available in 6.5 for IAP-105 apparently. So they need to create a seperate cluster for the new IAPs.

Offcourse with their IDS settings both clusters are seeing eachother as rogue and this is giving our customer some issues.

Is there a possibility to whitelist eachother in IDS?

 

Kind regards,

Thomas

Thomas
ACMX#370 ACCP

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.

Re: IAP105 and IAP315 IDS settings

You should be able to mark the other system's APs on each as 'valid' or 'known interferer'

Jerrod Howard
Sr. Techical Marketing Engineer
Frequent Contributor I

Re: IAP105 and IAP315 IDS settings

I tried on my LAB IAP, but couldn't find the possibility; but I will look into it again.

 

Tnx!

Thomas
ACMX#370 ACCP

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
MVP

Re: IAP105 and IAP315 IDS settings

check http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-manually-re-classify-a-monitored-AP-in-Instant/ta-p/260755

 

Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Frequent Contributor I

Re: IAP105 and IAP315 IDS settings

tnx koen, exactly what I was looking for!

Thomas
ACMX#370 ACCP

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: