I have a situation that I can seem how to figure out. I have 1 master and 3 local controllers. The Master and 1 local controller are M3 controllers in the same Aruba 6000 chassis. Both are in the same LAN. 3 vlans are configured. A production VLAN 30, A Guest VLAN 100, and a Wireless Network VLAN 208. All 3 VLANs can access and route as necessary. I have 2 other 3400 local Controlles that are in the WAN. The APs can get their profiles and provide device connection on the wireless network with no issues. However the APs Guest network through AP group and connects devices via SSID but does not get an address. From the remote WAN controller I can ping the IP gateway of the Master and local controller but cannot ping the individual address of the Master or local controller.
Since the local WAN controller know about the master controller is there a way to use the IP routes configuration on the controllers to route the Guest traffic.
#3400