Wireless Access

Reply
dfc
Occasional Contributor II
Posts: 11
Registered: ‎01-11-2012

IPSEC & AP's

The chapter in the User's Guide describes what seems to be a configuration of RAP witht alot of Controller ACL's, etc necessary to integrate the RAP-5 into the Controlelr domain. I've done that & it seems to work ok, but am wondering if all of this configuration on the Controller  is necessary to incoprorate an AP 105 for instance into this IPSEC/encrypted setup

Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: IPSEC & AP's

For RAP-2, RAP-3, RAP-5, and newer generation APs (those that do certificate authentication), they do not require the ACLs you mention.   If you have a campus AP that you want to be a RAP, whitelist it and when provisioning it, choose Remote AP (yes) and certificate authentication.   You should not have to create any ACLs for this to work.

 

 

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

dfc
Occasional Contributor II
Posts: 11
Registered: ‎01-11-2012

Re: IPSEC & AP's

I white-listed the ap 105 on a 651 using 6.1.2.4. It still does not see it even to provision.

Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: IPSEC & AP's

If I understand you correctly....

 

For an AP-105 (or any Campus AP), you'll need to have it connect to the controller first internally as a Campus AP, then you can provision it as a RAP.    The RAP-2/3/5 can be provisioned directly without having to do that.

 

Does that make sense?

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Search Airheads
Showing results for 
Search instead for 
Did you mean: