Wireless Access

Reply
MVP
Posts: 112
Registered: ‎01-05-2016

If configure 2 controllers to master and local, what info will not be sync ?

Hi, we have 2 controllers and want to configure them as master and local, besides layer 3 Ip address setting is different, any other info won't be sync from master controller? Please advise, thanks in advance.

Guru Elite
Posts: 8,321
Registered: ‎09-08-2010

Re: If configure 2 controllers to master and local, what info will not be sync ?

VLANs, syslog, NTP, local credentials, SNMP, etc

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
MVP
Posts: 112
Registered: ‎01-05-2016

Re: If configure 2 controllers to master and local, what info will not be sync ?

Thanks for reply. 

 

How about server , server group, local DB (internalDB) ? 

Guru Elite
Posts: 8,321
Registered: ‎09-08-2010

Re: If configure 2 controllers to master and local, what info will not be sync ?

Take a look at this:



http://www.arubanetworks.com/techdocs/ArubaOS_60/UserGuide/Adding_Local_Swit
ches.php

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
MVP
Posts: 112
Registered: ‎01-05-2016

Re: If configure 2 controllers to master and local, what info will not be sync ?

Thanks for reply.

 

But the page cannot be found 

New Contributor
Posts: 4
Registered: ‎06-12-2014

Re: If configure 2 controllers to master and local, what info will not be sync ?

Search Airheads
Showing results for 
Search instead for 
Did you mean: