Wireless Access

Reply
Occasional Contributor II

If configuring 2 controllers as master /local, so all configuration done on master ?

Hi , if 2 controllers are configured as master and local, so all configuration should be done on master? Then AP provisioning should be do on local controller, is it correct?  Please advise, thanks in advance.

Guru Elite

Re: If configuring 2 controllers as master /local, so all configuration done on master ?

Both configuration and provisioning can be done from the master.
******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: If configuring 2 controllers as master /local, so all configuration done on master ?

Thanks for reply. 

So just need to set local controller ip as LMS/controller IP on AP provisioning , right? 

Trusted Contributor I

Re: If configuring 2 controllers as master /local, so all configuration done on master ?

you would do that in the AP system profile. that determines on which controller the AP ends up.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: