Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

If end user have 2 mobile devices and with bandwidth control.

This thread has been viewed 0 times

  • 1.  If end user have 2 mobile devices and with bandwidth control.

    Posted Oct 11, 2012 04:23 AM

    I enable bandwidth control based on the user with 512 kbps, if the end user have 2 mobiles devices. Does user use up to 1MB or 512kbps bandwidth?



  • 2.  RE: If end user have 2 mobile devices and with bandwidth control.

    EMPLOYEE
    Posted Oct 11, 2012 09:16 AM

    When you set a bandwidth contract in the user role, you have a choice of setting it per user, or per role.  If you set it per user, each user in that role will only get a 512k of bandwidth.  If you set it per role, all users will share 512k in total (not advised).

     



  • 3.  RE: If end user have 2 mobile devices and with bandwidth control.

    Posted Oct 11, 2012 09:11 PM

    If i set per user at 512kbps. which mean if the user have two mobile device such as one laptop and one tablet, in total user will use up 1Mbps, right? Can i configure based on per device?



  • 4.  RE: If end user have 2 mobile devices and with bandwidth control.

    EMPLOYEE
    Posted Oct 11, 2012 11:40 PM
    @jordontin wrote:

    If i set per user at 512kbps. which mean if the user have two mobile device such as one laptop and one tablet, in total user will use up 1Mbps, right? Can i configure based on per device?

    It is only 512k per "station", not per user.