Wireless Access

Reply
Aruba Employee
Posts: 5
Registered: ‎12-08-2015

If we run cloud controller 7000 series in Master Mode, Shall we have " Branch Mode" feature

If we run cloud controller 7000 series in Master Mode, Shall we have " Branch Mode" feature such as Policy Base Route, Interface Bandwidth Contract, Wan Link Health Check.

 

Thank you in advance.

MVP
Posts: 4,236
Registered: ‎07-20-2011

Re: If we run cloud controller 7000 series in Master Mode, Shall we have " Branch Mode" fe

A couple of things to make this happen:

- The controller needs to be running 6.4.3.x
- The Branch config is pushed from a Master Controller (72xx)
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Aruba Employee
Posts: 5
Registered: ‎12-08-2015

Re: If we run cloud controller 7000 series in Master Mode, Shall we have " Branch Mode" fe

Hi VIctor,

 

So it's mean, if we do not have 7200 to be a Master and 7000 to be a Branch Mode, we will not have any branch feature ?

 

 

Thank you in advance.

MVP
Posts: 4,236
Registered: ‎07-20-2011

Re: If we run cloud controller 7000 series in Master Mode, Shall we have " Branch Mode" fe

That's correct
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 1,418
Registered: ‎10-25-2011

Re: If we run cloud controller 7000 series in Master Mode, Shall we have " Branch Mode" feature

7000 series controllers are not meant to be run as masters
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: