Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Initial setup for Aruba controller 620 and iap 105

This thread has been viewed 0 times

  • 1.  Initial setup for Aruba controller 620 and iap 105

    Posted Aug 29, 2013 06:29 AM

    Hi everyone.

     

    I just get my aruba controller 620 and two iap 105. i did some research and reading on how to configure both devices so that it will appear in controller console, but no luck.

     

    my setup

    controller 620 connected to network 172.16.28.0/24

    two of my iap 105 connected in the same network which is 172.16.28.0/24

    DHCP given from my dhcp server in the same network as well.

     

    Is there any step that i missed? if there is easy 101 initial setu guide, can someone point me to the right direction lol.

    please let me know if you need any other information

     

    Thanks in advance:smileyhappy:



  • 2.  RE: Initial setup for Aruba controller 620 and iap 105

    Posted Aug 29, 2013 07:15 AM

    ve you checked the AP installation tab in the webui?

    Are the APs provisioned yet?

    What does the AP boot log say? Does it discover its master?



  • 3.  RE: Initial setup for Aruba controller 620 and iap 105

    Posted Aug 29, 2013 10:28 AM

    Hi Nesvik,

     

    I'll check it once i be back in office :-)

    Thanks



  • 4.  RE: Initial setup for Aruba controller 620 and iap 105

    Posted Aug 30, 2013 04:41 AM

    Hi,

     

    No AP was found

     Attached files areboth my iap webgui console and controller console.