Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Instant 8.3.0.0 Mesh disabled

This thread has been viewed 1 times

  • 1.  Instant 8.3.0.0 Mesh disabled

    Posted Jun 28, 2018 07:54 AM

    Hi! Im having problems setting up mesh in Instant 8.3.0.0. My setup works fine in 6.5.4.6, but upgrading to 8.3.0.0 gives me the "No mesh supported in current mode" when running Show ap mesh link. Running the same config, and downgrading to 6.5 fixes the issue.


    I have looked in the user guide for 8.3.0.0. but i can't find any new settings required to enable mesh in 8.x software.

    Anyone know what is up?



  • 2.  RE: Instant 8.3.0.0 Mesh disabled

    EMPLOYEE
    Posted Jun 28, 2018 08:30 AM
    What model access points are those?


  • 3.  RE: Instant 8.3.0.0 Mesh disabled

    Posted Jun 28, 2018 08:45 AM

    IAP-225, IAP215 and IAP 303H are present in the cluster. IAP-215 is my current Mesh Point.



  • 4.  RE: Instant 8.3.0.0 Mesh disabled
    Best Answer

    EMPLOYEE
    Posted Jun 28, 2018 09:27 AM

    The IAP-303H does not support mesh, so that might be why you got that message.



  • 5.  RE: Instant 8.3.0.0 Mesh disabled

    Posted Jun 28, 2018 09:28 AM

    That i did not know. Thank you.



  • 6.  RE: Instant 8.3.0.0 Mesh disabled

    EMPLOYEE
    Posted Jun 28, 2018 09:41 AM

    I got that from the ArubaOS 8.3.0.0 release notes:

    Screenshot 2018-06-28 at 08.39.15.png

     

    The other access points say that they support mesh.