Wireless Access

Reply
Super Contributor I

Instant Mesh commands

Hi community,

 

Are there any commands to know the status of a mesh link? I have a mesh network, but when I run the commands "show ap mesh link" or "show ap mesh neighbours" I have no output:

mesh_commands.JPG

Here you can see the mesh network in the Web UI:

mesh_WebUI.JPG

Many thanks in advance!

 

Regards,

Julián

Guru Elite

Re: Instant Mesh commands

It looks like you named an SSID "Mesh Link", but you do not have any mesh links formed.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Super Contributor I

Re: Instant Mesh commands

Hi Colin,

 

Yes it seems so. I have two SSIDs, "Santander CONSUMER" is only 2.4 GHz for users access and "Mesh Link" is only 5 GHz for the mesh and no users access, but it seems the APs are connected by a wired infrastructure. I will investigate.

 

Regards,

Julián

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: