Wireless Access

Reply
Occasional Contributor II
Posts: 10
Registered: ‎10-31-2012

Invalid value for SelectBuilder vrf_mem_alloc_1: '412'

Hi everyone,

 

When trying to enable VisualRF in AirWave 8.0.4.1, it came back with this message. Funny thing is, that when doing the same for 2nd appliance we haven't experienced same issue. 

 

Does anyone know what this message refers to, and what is a workaround? Thanks in advance.

 

 

Regards,

Nebojsa

Guru Elite
Posts: 8,324
Registered: ‎09-08-2010

Re: Invalid value for SelectBuilder vrf_mem_alloc_1: '412'

Select the amount of memory to allocate to visual rf in the drop down box, then click submit.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II
Posts: 10
Registered: ‎10-31-2012

Re: Invalid value for SelectBuilder vrf_mem_alloc_1: '412'

Hi TIm,

 

Few more questions: a) can the memory allocation be changed/upped at later stage if needed, without detriment to an existing data in VisualRF, b) on second appliance VisualRF->Setup there is, at the moment, nothing selected in that drop down menue. Is that expected, and c) what would be recommended value, or does that depend on server memory?

 

Thanks for such a prompt respond.

 

 

Regards,

Nebojsa 

Guru Elite
Posts: 8,324
Registered: ‎09-08-2010

Re: Invalid value for SelectBuilder vrf_mem_alloc_1: '412'

A) yes
B) in order to start the service, you need to select something
C) It depends on how important things like location accuracy are and how your box is spec'ed.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: