Wireless Access

Reply
Occasional Contributor I

Is it possible to select 2.4 GHz band and 5 GHz band?(APIN-0205)

Hi
I have a question about selecting band by force.

I'm emc testing enigineer & using apin-0205 for testing.

I have to select 2.4 & 5 GHz band when testing wifi device that supports 2.4 ghz & 5 ghz.
If i want to connect EUT to AP in 2.4 GHz, 5GHz Band of AP should be disable.

Ex)
EUT(2.4 GHz) <-----> Apin0205 (Only 2.4 GHz, 5 GHz should be diabled)
EUT(5 GHz) <-----> Apin0205 (Only 5 GHz, 2.4 GHz should be diabled)

Please give me some tip.


Guru Elite

Re: Is it possible to select 2.4 GHz band and 5 GHz band?(APIN-0205)

In the SSID configuration under Advanced, you can say what band you want the SSID to broadcast..

 

band.png

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: