Wireless Access

Reply
Occasional Contributor I
Posts: 5
Registered: ‎05-12-2011

Is there a command to set the default partition in cpboot

My 0:1 partition got corrupted from a failed upgrade and I can't change the setting for the default partition. I can boot into the 0:0 partition using cpboot, is there a command to hard set the default partition so I can use the WebUI again? Thanks

Aruba Employee
Posts: 664
Registered: ‎04-15-2009

Re: Is there a command to set the default partition in cpboot

"boot flash 0:1" should do it.

 

Check out http://support.arubanetworks.com/ArubaOSKB/tabid/111/Default.aspx

Aruba Employee
Posts: 664
Registered: ‎04-15-2009

Re: Is there a command to set the default partition in cpboot

oops.. "boot flash 0:0"

Occasional Contributor I
Posts: 5
Registered: ‎05-12-2011

Re: Is there a command to set the default partition in cpboot

using bootf 0:0 loads that partition, I was able to get to the web interface after that, but  not log in. One step closer. Thanks

Search Airheads
Showing results for 
Search instead for 
Did you mean: