Wireless Access

Reply
New Contributor
Posts: 4
Registered: ‎03-12-2013

Is there a way to only broadcast N with AP-105's connected to a 620 controller?

I would like to set up my wireless network with my 620 controllers, and AP-105's, but only offer N wireless. Is there a way this can be done from the controller?

Aruba
Posts: 1,290
Registered: ‎08-29-2007

Re: Is there a way to only broadcast N with AP-105's connected to a 620 controller?

Yes, this can be done by changing the ht-ssid-profile.  If you want it to only happen to certain APs and not others, you'll need to create a new ssid profile and apply the new ht-ssid-profile, and then add to a VAP and then ap-group.

 

wlan ht-ssid-profile <name>
no legacy-stations

 

If you want to deny 802.11b stations completely, just remove the 1,2,5 & 11 rates from the ssids.

 

Alternatively you may want to consider having a traffic-management-profile within the ap-group with a shaping policy of 'preferred-access'.  This will give preference to HT stations and prevent legacy clients consuming airtime.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Search Airheads
Showing results for 
Search instead for 
Did you mean: