Wireless Access

Reply
Leo
Occasional Contributor II
Posts: 10
Registered: ‎03-22-2013

Issues to save Firewall AMSDU configuration on Aruba OS 5.0.3.0

Hi,

 

In order to solve the new iMac connection issues, I enabled A-MSDU aggragation mode on controllers by using the following commands:

# firewall amsdu

show firewall and amsdu is enabled

# write mem

# reload

But AMSDU mode is still disabled after rebooting. seems AMSDU configuration can not be saved. I tried this on Aruab6000, Aruba3600 and Aruba3200 but no luck. After rebooting, "AMSDU enable" is gone. All my controllers are using Aruba OS 5.0.3.0.

Any advices will be really appreciated.

thanks,

 

MVP
Posts: 4,271
Registered: ‎07-20-2011

Re: Issues to save Firewall AMSDU configuration on Aruba OS 5.0.3.0

[ Edited ]

 

 

You should just probably open a TAC case or consider upgrading to a more recent AOS code

 

Have you tried doing this through the GUI instead ?

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Leo
Occasional Contributor II
Posts: 10
Registered: ‎03-22-2013

Re: Issues to save Firewall AMSDU configuration on Aruba OS 5.0.3.0

THanks, I tried to find the settings for AMSDU aggregation mode through Web interface but I was not able to find it.

MVP
Posts: 4,271
Registered: ‎07-20-2011

Re: Issues to save Firewall AMSDU configuration on Aruba OS 5.0.3.0

 

Try in the Configuration>Statefull Firewall

 

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Leo
Occasional Contributor II
Posts: 10
Registered: ‎03-22-2013

Re: Issues to save Firewall AMSDU configuration on Aruba OS 5.0.3.0

I could not find the "AMSDU" settings under "Configuration/Stateful Firewall" on GUI.

 

thanks,

Search Airheads
Showing results for 
Search instead for 
Did you mean: