Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎10-14-2015

Just upgraded the firmware, can we find out the version that we upgraded from?

Our networking guy just updated the Aurba Operating System Software to version 6.4.2.6-4.1.1.10_51810, but I'd like to know the version that we upgraded from. Is there a way to check and see which version was previously installed?

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: Just upgraded the firmware, can we find out the version that we upgraded from?

[ Edited ]

Do you have airwave ? if you do then you can see this in the Event logs

2015-10-15 13_39_55-AMP-SERVER.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor
Posts: 3
Registered: ‎10-14-2015

Re: Just upgraded the firmware, can we find out the version that we upgraded from?

We do have Airwave, but our trial license expired until our company pays for support so I can't really do anything in there. We do have the Aruba virtual controller, can it be checked from there?

Regular Contributor I
Posts: 187
Registered: ‎10-20-2010

Re: Just upgraded the firmware, can we find out the version that we upgraded from?

"sh image version" should have a boot image (the new one) and a second image (the old one)

New Contributor
Posts: 3
Registered: ‎10-14-2015

Re: Just upgraded the firmware, can we find out the version that we upgraded from?

That command shows me the Backup Partition Build Version which was 6.4.2.3-4.1.2.1, so I'll assume that was the previous version.

 

Thanks for the help.

Search Airheads
Showing results for 
Search instead for 
Did you mean: