Wireless Access

Reply
Occasional Contributor II

L2-GRE Tunnel between two Controllers & Assign to SSID

Hi,

We have a VLAN on a controller that we want to L2-GRE-Tunnel to a second controller which don't have this VLAN. Then we want wo assign the VLAN to an SSID.

What we have done so far is this:

http://www.arubanetworks.com/techdocs/ArubaOS_6_5_2_X_Web_Help/Content/ArubaFrameStyles/Network_Parameters/Configuring_GRE_Tunnels.htm#Configur

 

But is seems not work.The client is not getting an IP address.

Do we miss anything?

 

Regards

René

 

 

 

MVP

Re: L2-GRE Tunnel between two Controllers & Assign to SSID

I believe the VLAN will have to exist on each device involved - the VLAN can be pruned from the controller "without the VLAN," but it will have to have the VLAN internally to pass the traffic through.

To guess any better I'll need to see configuration snippets or a picture (or both) ;)

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
Occasional Contributor II

Re: L2-GRE Tunnel between two Controllers & Assign to SSID

Please find attached a screenshots of the configuration.

The VLAN 51 is configured on Controller A only and should also be available on Controller B to assign it to a SSID.

 

We also configured a policy on controller B to redirect traffic to the tunnel.

Occasional Contributor II

Re: L2-GRE Tunnel between two Controllers & Assign to SSID

OK, seems to work now.

Thanks msabin.

You were right, we also had to create the vlan on controller b.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: