Wireless Access

Reply
Occasional Contributor II
Posts: 17
Registered: ‎02-12-2016

L2TP pool reset

Hi,

 

We have a large L2TP pool (8000 odd address) for our VPN clients, every time a client connects or reconnects another IP is assigned incrementally.

 

My question is, what happens once all addresses have been used, does the pool reset? (not all addresses are used simultaneously)

 

Thanks,

 

MVP
Posts: 951
Registered: ‎04-13-2009

Re: L2TP pool reset

Try this command to see how many addresses are in use/free.

 

#show vpdn l2tp local pool

 

When an address is no longer in use it will be released back into the pool.

 

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Occasional Contributor II
Posts: 17
Registered: ‎02-12-2016

Re: L2TP pool reset

Hi James,

 

All addresses not in use are free which is good. My concern is, what happens when the last ip in the range is used. Does it then start from the 1st IP again?

 

Cheers,

Jack

MVP
Posts: 951
Registered: ‎04-13-2009

Re: L2TP pool reset

Hi Jack, Yes. The addresses used increment each time. When the last address in the pool is used the 1st available one will be used next.
Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
Showing results for 
Search instead for 
Did you mean: