Wireless Access

Reply
Occasional Contributor II
Posts: 11
Registered: ‎08-21-2012

Load Balancing Inactive

Hi guys,

 

I have a customer who has been modifying the configuration he was left with without applying any change control.

 

Having decided he was getting poor load balancing he set the limit per AP of 12 clients. As a result his APs service up to 12 and clients will not associate to another AP until the nearest one is "full".

 

By setting his client limit to 12 did the customer disable normal load balancing?

 

When looking at AP details screen, see below, it states load balancing is "inactive" - has he inadvertantly switched it off when setting his client limit?

 

Load Balancing.png

Cheers guys!

MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: Load Balancing Inactive

Do you have spectrum load balancing enabled under the 

802.11a radio profile ?

 

 

Thanks

 

If you find the post helpful please Kudo the post

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: Load Balancing Inactive

 

Please see this : http://community.arubanetworks.com/t5/Wireless-and-RF/AP-Load-Balancing-vs-Spectrum-Load-Balancing/td-p/3640

 

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: