Wireless Access

Reply

Low Goodput

This morning I have an unusually high amount of APs reporting low goodput on 5GHz.   These APs shows "0 - 6 Mbps" for more than 90% of the traffic TO the client.  Frame rates FROM the client are just fine, mostly 108+ Mbps.  Only a few APs' noise floor is below -85, channel utilization is very low, and there aren't a high amount of frame drops to the client.  Any suggestions on troubleshooting low frame rates to the client?

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: