08-02-2013 07:19 AM
I want to set up MAC filtering on one of my Wi-Fi SSID's to allow only the mac address I enter. Is there a step by step guide on how to do this I have the 3200XM console 220.127.116.11 build?
Thank you for your help.
08-02-2013 07:25 AM
This KB article should help you out.
08-02-2013 10:59 AM
I've tried following this but my test client won't grab a dhcp adderss from the correct address range. I specified a certain VLAN for the ssid and it's grabbing a DHCP address from VLAN whois IP range was supposedly firewalled off. Weird.
08-20-2015 11:49 PM - edited 08-21-2015 01:58 AM
Could you share videos, how to do ? To many topics opened on this case. I read article but not same our aruba version. I tried but somethings went wrong.
ArubaOS (MODEL: Aruba650), Version 18.104.22.168
12-06-2016 12:45 AM
yes am having the same problem , I want to mac filter any employee who is using the wifi .. not only by the password .. but also with maz address , only devices with mac address which I manually entered can access my wifi , can I do this via aruba GUI ?
12-06-2016 04:29 AM
am using Aruba 7030 mobility controller .. I don't want to make a mac authentication profile coz I don't want a complicated thing , I just want employees to authenticate using WPA2 password but only specific mac addresses can successfully access the wifi .. as simple as that ! , I used to do this simple issue using normal wifi routers .
12-06-2016 04:35 AM
There is no other way to do this without a mac authentication profile: http://community.arubanetworks.com/t5/Controller-B
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base