12-13-2017 05:54 AM
I've configured a mesh network with Aruba Controller 7030.
My question is: How can I configured a mesh network among three Access Points.?
The first one should be Mesh Portal, because it is connected to the switch, but what about the others access points, because these one just has AC cables.
Thanks in advance.
Solved! Go to Solution.
12-13-2017 05:58 AM
They should be provisioned as mesh points, if they will not be connected to the network via ethernet. Provision them and reboot.
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.