Anyone know where I would look to see the link quality of the MESH links? Is that CLI only? I can't seem to find it in either gui or cli.
Anyone?
Thanks!
Hi Scott,
did you checked this:
http://www.arubanetworks.com/techdocs/ArubaOS_64x_WebHelp/Content/ArubaFrameStyles/Mesh/Verifying_the_Network.htm
Is it for Instant or Controller based?
For Instant see https://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-troubleshoot-IAP-Mesh-related-issues/ta-p/186872
Cheers,
Stefan
show ap mesh neighbours
show ap mesh topology
The above commands can help you in verifying current RSSI/Tx/Rx rates across the mesh link.
This will give bit an idea about the mesh state.
@Nitesh Singla wrote:Hi Scott, show ap mesh neighboursshow ap mesh topology The above commands can help you in verifying current RSSI/Tx/Rx rates across the mesh link. This will give bit an idea about the mesh state.
Thanks Nitesh! This is exactly what I was looking for!
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.