Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

MST 200 vlans and trunks

This thread has been viewed 0 times

  • 1.  MST 200 vlans and trunks

    Posted Oct 22, 2014 11:05 AM

    Hi all

     

    we are configuring two MST200 and we need that 2 vlans pass throught the antenas.

     

    This antennas are connected to a Nortel 3524 Switch.

     

    We have done the configs with the port on the switch to be trunk mode ( allowed both vlans) and also tried to trunk the port on Aruba to be alowwed both vlans.

     

    Is this sufficient to be able to have traffic on both vlans ?

     

    We are only having traffic on data vlan 1 , vlan 4 that is voip , is not getting to the other side.

     

    Since i am new to this MST´s , am I missing some config?

     

    Regards