Wireless Access

last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Manual and Auto GRE to Controller - Verification

This thread has been viewed 2 times

  • 1.  Manual and Auto GRE to Controller - Verification

    Posted Mar 16, 2015 09:53 AM

    We have IAP 225 deployed at all of our branch loacation tunneling back to a pair of 7210 controllers at our HQ via our MPLS network. The question i wanted to know, is there a way to verify that the tunnel is up/estableshed and packages are flowing both ways on the controller and on the IAP? Is there a command that will show that on both controller and IAP?

     

    Thnx.


    #AP225
    #7210


  • 2.  RE: Manual and Auto GRE to Controller - Verification

    Posted Mar 16, 2015 10:27 AM

    On the Instant you can run the following :

    IAP-1# show vpn status

     

    On the controller:

    (MASTER-CONTROLLER) #show  iap table

     

    https://arubanetworkskb.secure.force.com/pkb/articles/FAQ/What-is-AutoGRE-feature-on-IAP-4-0

    https://arubanetworkskb.secure.force.com/pkb/articles/FAQ/What-is-the-pre-requisite-for-Aruba-GRE-feature-on-Instant