Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Manually set IP on AP-124

This thread has been viewed 3 times

  • 1.  Manually set IP on AP-124

    Posted Jan 02, 2014 01:27 PM

    I was able to console in to the AP-124 and ran the following commands after interrupting the boot process:

     

    setenv ipaddr 10.10.10.10

    setenv mask 255.255.0.0

    setenv gatewayip 10.10.10.1

    saveenv

     

    When the ap reboots it still gets a DHCP IP address.

     

    Controller Information:

    Controller ModelAruba7220-US
    CountryUS
    HardwareRestricted US
    ArubaOS Version6.2.1.1

     

    Thanks for any assistance,

    Fernando



  • 2.  RE: Manually set IP on AP-124

    EMPLOYEE
    Posted Jan 02, 2014 01:52 PM

    the netmask variable is not "mask" it is "netmask"



  • 3.  RE: Manually set IP on AP-124

    Posted Jan 02, 2014 03:16 PM

    Ok great thanks. that worked. didn't realize that it will still take variables that are not valid.



  • 4.  RE: Manually set IP on AP-124

    Posted Jan 20, 2014 09:54 AM

    I had to set the master ip and server ip

    setenv master {master ip}

    setenv serverip {master ip}



  • 5.  RE: Manually set IP on AP-124

    Posted Jan 20, 2014 10:54 PM
      |   view attached

    Here is a document that could be useful for you

    Im attaching to this message

     

    Cheers

    Carlos

    Attachment(s)

    pdf
    AP Commands.pdf   413 KB 1 version