Wireless Access

last person joined: 20 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Mesh point not working

This thread has been viewed 6 times

  • 1.  Mesh point not working

    Posted Jun 19, 2012 04:15 PM

    Hi, I created a mesh cluster profile. Provisioned a ap as a cluster portal, and provisioned a second ap as a mesh point. Both ap's are using the mesh cluster profile. My problems is that just after the mesh point ap is provisioned it does not get an address and the green light just blinks?

     

    jason



  • 2.  RE: Mesh point not working

    Posted Jun 19, 2012 05:49 PM

    Hi Jason,

     

    Long time no chat.

     

    What version of AOS are you using ?

    Are you using encryption or open-system on the mesh link ?

     

    I assume the two devices are  on the table top at present ?



  • 3.  RE: Mesh point not working

    Posted Jun 20, 2012 12:14 AM

    hi, we are using 6.1.3.2 opensystem.

     

    Thx jason



  • 4.  RE: Mesh point not working
    Best Answer

    Posted Jun 25, 2012 02:01 PM

    Problem solved. The ap's had to be in the same ap group as the cluster profile.