Hi,
I am running with code 6.5.0.2 on Aruba7240XM.
The Mesh backhaul is on 5 ghz radio. When I monitor the status of mesh points on dashboard, there are few of them against which the channel is reflected as 0, PFA. What do it signify?
From the cli, could see appropriate channels against them though:
(WLC_0002) #show ap radio-summary dot11a | include XXX1
XXX1 AP-GRP1 274 172.25.44.142 5 MP::36 15/20 -94/55/12 6/4/5/6/5/8 24/25/24/25/26/23 2/1/1/2/1/2
(WLC_0002) #show ap radio-summary dot11a | include XXX2
XXX2 AP-GRP1 277 172.25.44.132 5 MP::36 15/28.5 -97/51/12 5/3/4/5/4/6 24/24/25/24/22/23 1/1/1/1/1/1
(WLC_0002) #show ap radio-summary dot11a | include XXX3
XXX3 AP-GRP1 277 172.25.44.222 5 MP::36 15/28.5 -97/56/10 7/9/11/13/10/14 21/20/21/18/20/18 2/2/2/2/2/2