Implementing a mesh setup with IAP175, using ant 2x2 5614 antenna on either end.
What practical distance is achievable, with a clear LOS.
The goal is to bridge two ethernet segments.
Please read this post :
http://community.arubanetworks.com/t5/802-11n-and-802-11ac-Basics-RF/mesh-link-in-IAP-175/m-p/76842#M905
ArubaOS and AirMesh equipment is rated to about 8KM, and is constrained primarily by path loss.
IAP is currently limited to somewhere between 600m and 1KM, due to a software issue. We will be extending this to the full 8KM as well in the next few months.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.