05-22-2013 06:12 AM - edited 05-22-2013 06:13 AM
Implementing a mesh setup with IAP175, using ant 2x2 5614 antenna on either end.
What practical distance is achievable, with a clear LOS.
The goal is to bridge two ethernet segments.
05-22-2013 06:17 AM
Please read this post :
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
05-22-2013 09:53 AM
ArubaOS and AirMesh equipment is rated to about 8KM, and is constrained primarily by path loss.
IAP is currently limited to somewhere between 600m and 1KM, due to a software issue. We will be extending this to the full 8KM as well in the next few months.