Wireless Access

last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Mobility Master L3 Redundacy

This thread has been viewed 10 times

  • 1.  Mobility Master L3 Redundacy

    Posted Mar 14, 2018 06:55 AM

    Hi All,

     

    Aruba newbie so hope this isnt a dumb question.

     

    I have 2 physical MM devices destined for different datacentres/subnets.

    L3 redundancy setup and databases syncing.

     

    What 'resilient' IP should I point Managed Devices/MC's to, as there is no VRRP instance?

    Do I add a secondary IP after full-setup?

     

    ---------

    IPSEC SA (V2) Active Session Information

    -----------------------------------

    Initiator IP                              Responder IP

    ------------                              ------------

    172.20.230.129                            10.142.105.129

     

    (WOR-MM-01) [mynode] #show database synchronize

     

    Last L2 synchronization time: Standby not synchronized since last reboot

    Last L3 synchronization time: Wed Mar 14 09:57:21 2018

    To Master Switch at unknown IP address:  succeeded

    To Secondary Master Switch at 172.20.230.129:  succeeded

     



  • 2.  RE: Mobility Master L3 Redundacy

    Posted Mar 14, 2018 07:39 AM

    Hi, please ignore have answered my own query.

     

    Secondary master is configured during full-setup:

     

    This device connects to Master switch via VPN concentrator (yes|no) [no]:
    Is Master switch Virtual Mobility Master? (yes|no) [yes]: no
    Master switch Authentication method (PSKwithIP|PSKwithMAC|FactoryCert) [PSKwithIP]:
    Enter IPSec Pre-shared Key: *********
    Re-enter IPSec Pre-shared Key: *********
    Do you want to enable L3 Redundancy (yes|no) [no]: yes
    Enter Secondary Master switch IP address or FQDN: 10.142.105.129