Wireless Access

Reply
Occasional Contributor I

Mobility controller (not responding)

Hi,

 

My demo controller (W-620) full licensed has a problem with his

/mswitch/bin/wms              PROCESS_INITIALIZING  -                 131       240            4                Tue Nov 29 01:59:10 2011

I think.

 

This was under 6.1.2.3, so I upgrade it to 6.1.2.4 but I have the same problem.

After three (3) clicks I don't receive any response within AP Installation, then I checked the process (show process monitor statistics) where the above line was very high after (131 restarts within 10 minutes) 

 

Is there something else that I can check?

 

Danny

SE @ Dell
Networking Domain
Guru Elite

Re: Mobility controller (not responding)

Please open a TAC case for that one.

 

The only thing I think you can try is "process restart wms core".

 

If that does not work, start completely from scratch:

 

- Save your license keys

Do a "wms reinit-db" and reboot

 

If that does not work, save your license keys and then do a "write erase all"

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I

Re: Mobility controller (not responding)

Joseph,

 

Likely that with this problem also my Captive Portal doesn't work?

 

I was testing the CP for a customer where it don't work and I didn't get it working on my LAB controller.

 

I will open a Case.

 

Thnx.

 

 

Danny

SE @ Dell
Networking Domain
Regular Contributor I

Re: Mobility controller (not responding)

Any update on this issue?

Occasional Contributor I

Re: Mobility controller (not responding)

what I try to do is a "wms reinit-db" but the system is saying.

 

(ADK-620) #wms reinit-db
RF-Plan data and WMS Database will be re-initialized.Do you want to proceed with this action [y/n]: y
Module WMS is busy. Please try later


After a reload I still have the same problem.

 

Are there other commands that I can try that I don't know?

Danny

SE @ Dell
Networking Domain
Occasional Contributor I

Re: Mobility controller (not responding)

Re-installing the software and start from zero.

 

This helps, sames that the other partition (software) was corrupt.

 

Thanks for all the help you all give.

 

 

Danny

SE @ Dell
Networking Domain
New Contributor

Re: Mobility controller (not responding)

Hi ,

 

This is muthu . I have configured 3200 controller .and 105 Ap . after cnecting network i am getting error messge 

 

 

 

Guru Elite

Re: Mobility controller (not responding)

Muthu,

 

Please open a new thread for this issue.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: