Wireless Access

Contributor II
Posts: 49
Registered: ‎11-02-2015

Mobility domain config guide

[ Edited ]

I've been doing some studying for my ACMX written and I've come across the Mobility Domain subject. 


Ran into this section in the configuration guide and I was wondering if the second entry in the HAT table is a typo? I want to make sure i'm not missing something...


To me it appears that entry 2 should be either directed to controller 1 or the network should be a 10.2.x.x:



Can someone clarify if it is not a typo?

Posts: 952
Registered: ‎04-13-2009

Re: Mobility domain config guide

Looks like that whole 2nd line is a typo. 



ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
Showing results for 
Search instead for 
Did you mean: