Wireless Access

Reply
Occasional Contributor I
Posts: 7
Registered: ‎07-27-2015

Monitoring Bandwidth Contract Policing

In addition to QoS, we enforce local bandwidth contracts at remote locations before tunneling traffic back to a DC via MPLS. I am currently able to see this policing by running the `show datapath bwm table` on each local controller, but I'd prefer to be proactive with the monitoring. I search the MIBs for any policed traffic values, but couldn't find any.

 

Any alternatives? We have explored monitoring usage in other locations, but I'd like to monitor as close the where the enforcement (i.e., the drops) are occuring.

 

Running a mix of 3000 & 7000 series on 6.4.2.6 & 6.4.4.9.

Guru Elite
Posts: 20,794
Registered: ‎03-29-2007

Re: Monitoring Bandwidth Contract Policing

Unfortunately, "show datapath bwm" is the only place where this is accessible...



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: