Wireless Access

Reply
Occasional Contributor II
Posts: 20
Registered: ‎04-09-2015

Mounting options for AP 225

Good Afternoon Airheads,

     I'm looking for some advice regarding mounting an AP 225.  I'm replacing an existing Cisco AP and the the mounting location is on the underside of a steel I-beam/girder in a warehouse environment about 30 ft in the air.  All I have been able to find officially is the wall mounting kit when what I believe I need is more of a mounting plate and clamps of some sort.  Just looking for some direction from folks who may have dones something like this before to see what they used.

 

Regards,

 

Bill Fischer

Versatile Inc.

Occasional Contributor I
Posts: 6
Registered: ‎03-12-2014

Re: Mounting options for AP 225

I have used the wall mount bracket (AP-220-MNT-W1) in a steel beam using self tapper screws. Mounted to both wall and ceiling.

Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: Mounting options for AP 225

[ Edited ]

You can consider using a standard Aruba mount kit with standard "C"/Beam clamps.   Such as Granger 3KF30 to mount it to the I-Beam.

 

800px-I-Beam_Clamp_AP135.jpg

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Occasional Contributor I
Posts: 6
Registered: ‎03-12-2014

Re: Mounting options for AP 225

Occasional Contributor II
Posts: 20
Registered: ‎04-09-2015

Re: Mounting options for AP 225

Thanks very much.  This is going to work perfectly.

Search Airheads
Showing results for 
Search instead for 
Did you mean: