Wireless Access

Reply
DNe
Contributor II

Move MD in MM-Tree

Hi Guys,

 

iam staring over with AOS 8.1 and i've connected two VMCs to the MM. Now i got serveral issues which i need help from you :-)

 

1) on the MM GUI i didn't see the MM-Backup in the Tree menu but it syncs database and is connected - is this a normal behavior ?

2) I've connected two VMCs to the MM. They are connected with the setup to the MM at the /md folder. How can i move them now to the final Group that i have created ?

 

Thanks in advance!

 

Dennis

ACMP

Re: Move MD in MM-Tree

The Backup MM should be in the MM tree, under 'Mobility Master' (see screenshot. 

 

Coming in AOS 8.2, you will be able to move MDs to different nodes in the tree. For now, it's a manual process.

Jerrod Howard
Sr. Technical Marketing Engineer
Frequent Contributor II

Re: Move MD in MM-Tree

When is 8.2 scheduled to to available ?

Thanks,

Re: Move MD in MM-Tree

next coupld of weeks, no firm date yet.

Jerrod Howard
Sr. Technical Marketing Engineer
Frequent Contributor II

Re: Move MD in MM-Tree

Thank you for the info !

DNe
Contributor II

Re: Move MD in MM-Tree

Okay, Thanks for the MD moving info.

 

Why is the B-MM not in my Tree ? I've got Vrrp and Master-Redundancy running. If i connect to the B-MM i can only do local config and dind't got the tree on the left - so everything should be fine exapt the display in the tree of the b-mm. Do i need to add him manually with the + again ? I did the ASE documentation for the b-MM and there is no step for adding it manually.

 

Thanks in advance.

ACMP
DNe
Contributor II

Re: Move MD in MM-Tree

Okay, after an Update to the latest OS and a reboot the B-MM appeard. Dunno what happend but its looking good now.

 

My Workaround for the controller (VMC) was that i kicked them out - and they automatically reboot - and in the meantime i add them with the + command to the group that i want. When they come up they take place in the new group.

 

I get a little bit confused about those problems... but i hope 8.2 and 8.3 would fix some issues :-) and i hope my mm is now running correctly to add my controllers :)

ACMP
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: