Wireless Access

Reply
Super Contributor II

Multipe Layer-2 Authentication

One of my cumstomer has very strange requirements, The customer has an SSID name "SMA-Wireless", Now the customer want to apply PSK + MAC based authentication on this same SSID. Is it possible to configure both PSK and mac based authentications on single SSID?  if possible please explain how? as far as i know we can  configure MAC base authentication with Captive portal. but i m not sure if we can configure multiple Layer-2 authentications on same ssid.

Thanks & Regards
Syed Murad Ali
ACMP ACMA CCNA

Re: Multipe Layer-2 Authentication

 

It is possible to accomplish this by configure the aaa inital role to either authenticated or a deny if you want users to only have access  after the pass the mac authentication and the device should be place under the mac auth role

 

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Super Contributor II

Re: Multipe Layer-2 Authentication

Hi cfabian,

Let me explain what i understand

Step 1: Go to AAA profile and assign MAC authentication profile to it. The initial role of the AAA profile would be logon and MAC authentication default role will be authenticated.
Step 2: Go to SSID profile and and assign PSK to it

Thanks & Regards
Syed Murad Ali
ACMP ACMA CCNA

Re: Multipe Layer-2 Authentication

 

That's correct.

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Super Contributor II

Re: Multipe Layer-2 Authentication

Thanks Victor,

I will test the same and will get back to you if there is any issue..
Thanks & Regards
Syed Murad Ali
ACMP ACMA CCNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: