Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎10-11-2012

Need Help with bandwidth throttle - ASAP

[ Edited ]

Hello All,

 

The issue I am having is with my SSID Bandwidth throttle. We currently have 3 SSID's in place - one is for employees, the second one is for Guests, and the third one is for Phones/Tablets.  Well, the problem is that the Guests and Phone/Tablet SSID's was configured with low throughput.  

 

I thought the setting was under Configuration / Security (Access Control) / Select the User Role (guest) and edit / Bandwidth Contract - but according to the gui, it's not enforced.   Am i looking in the right place?  Where can i find the setting, whether it's through the gui or the CLI.

 

Our Controller is a 3400 running OS 6.1.2.5. 

 

 

Thank you in advance.   

Aruba Employee
Posts: 135
Registered: ‎06-18-2007

Re: Need Help with bandwidth throttle - ASAP

Where do you see it say it's not enforced?  I've done the same as you outlined for several networks I have configured and it works fine.

 

-Mike

New Contributor
Posts: 2
Registered: ‎10-11-2012

Re: Need Help with bandwidth throttle - ASAP

all user and group roles show not enforced.  however, if i log into either of those two SSID's i notice a big bandwidth difference when i navigate the web or go to speedtest.net.

Guru Elite
Posts: 21,279
Registered: ‎03-29-2007

Re: Need Help with bandwidth throttle - ASAP


rubix1 wrote:

all user and group roles show not enforced.  however, if i log into either of those two SSID's i notice a big bandwidth difference when i navigate the web or go to speedtest.net.


Where does it say "not enforced"?

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: