Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎10-11-2013

No VisualRF data for Cisco 3502 AP's

I have airwave v7.3.7 32bit installed and have recently upgraded my AP's to Cisco 3502 and 3602.  Airwave is recognizing them as Aironet 1000 LWAPP's.  I can't get any VisualRF data from them and there is no settings in Device Setup/communications that I can see to configure the credentials.  Any ideas?

Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: No VisualRF data for Cisco 3502 AP's

[ Edited ]

I  believe support for the 3500s came in 7.3.8; and the 3600 series in 7.5.4.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

New Contributor
Posts: 3
Registered: ‎10-11-2013

Re: No VisualRF data for Cisco 3502 AP's

Are those 64bit versions or can I get a 32bit upgrade?

Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: No VisualRF data for Cisco 3502 AP's

There should be a 32bit for 7.3.8; but not 7.5.4.

 

 

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

New Contributor
Posts: 3
Registered: ‎10-11-2013

Re: No VisualRF data for Cisco 3502 AP's

Thanks clembo.  I'm still trying to get managment to OK the 64bit OS upgrade.  This may be the push they need.

Search Airheads
Showing results for 
Search instead for 
Did you mean: